- Added support for the following GPUs:
GeForce GTX 680M
- Removed the ability to enable SLI on GPUs with ECC enabled.
- Fixed several bugs that prevented some RandR transform geometries from
- Fixed a bug that caused frequent hangs or crashes on some systems.
- Fixed a bug that would cause corruption and performance issues in certain
OpenGL applications such as Amnesia: The Dark Descent on GeForce 6 and 7 GPUs.
- Fixed a bug that caused applications that use DirectColor visuals, such as
Enemy Territory: Quake Wars and Braid, to appear in shades of blue instead
of the correct colors.
- Modified handling of RRSetScreenSize requests to ignore requests that
do not actually resize the screen. This reduces screen flicker in certain
cases when using GNOME.
- Added a new option, "--disable-nouveau" to nvidia-installer. This option changes the action that is chosen by default when Nouveau
is detected by nvidia-installer. If the "--disable-nouveau" option
is set, then the default will be to attempt to disable Nouveau when
it is detected; otherwise, no attempt will be made unless requested.
- Added support for xserver ABI 13 (xorg-server 1.13).
- Added support for RandR per-CRTC gamma manipulation through the
RandR 1.2 RRGetCrtcGammaSize, RRGetCrtcGamma, and RRSetCrtcGamma
- Fixed a bug that caused RRSetOutputPrimary requests to incorrectly generate BadValue errors when setting the primary output to None. This
caused gnome-settings-daemon to crash after changing the screen
configuration in response to a display hotplug or the display change
hot-key being pressed.
- Fixed a problem where RENDER Glyphs operations would exhibit severe performance issues in certain cases, such as when used with gradients
by Cairo and Chromium.
- Fixed a bug that caused X to hang when resuming certain DisplayPort display devices (such as Apple brand mini-DisplayPort to dual-link DVI adapters) from power-saving mode.
- Fixed a bug that caused an X screen to be extended to Quadro SDI Output devices by default. An X screen will still use an SDI Output device if
it is the only display device available. To use a SDI Output device on
an X screen with other display devices available, include the SDI Output
device with either the "UseDisplayDevice" or "MetaMode" X configuration
- Updated X11 modeline validation such that modes not defined in a display device's EDID are discarded if the EDID 1.3 "GTF Supported"
flag is unset or if the EDID 1.4 "Continuous Frequency" flag is
unset. The new "AllowNonEdidModes" token for the ModeValidation
X configuration option can be used to disable this new check.
- Fixed a bug, introduced in the 295.xx release series, with EDID detection on some laptop internal panels. This bug caused the
laptop internal panel to show six small copies of the desktop.
- Added support for FXAA, Fast Approximate Anti-Aliasing. Using regular anti-aliasing modes or Unified Back Buffers with FXAA is not currently supported.
- Enhanced the functionality of the IncludeImplicitMetaModes X configuration option:
Implicit MetaModes will be added for the primary display device,
even if multiple display devices are in use when X is initialized.
Implicit MetaModes will be added for common resolutions, even
if there isn't a mode with that resolution in the mode pool of
the display device.
Extended the syntax of the IncludeImplicitMetaModes X
configuration option, e.g., to control which display device is
used for creation of implicit MetaModes.
See the description of the IncludeImplicitMetaModes X configuration
option in the README for details.
- Modified the handling of the RandR 1.0/1.1 requests RRGetScreenInfo and RRSetScreenConfig (e.g., `xrandr -q --q1` and `xrandr --size ...`
and `xrandr --orientation ...`) such that they operate on MetaModes.
This was the behavior in NVIDIA X driver versions 295.xx and
earlier, but 302.xx releases altered the handling of these RandR
1.0/1.1 requests to operate on a single RandR output's modes.
- With the above changes to IncludeImplicitMetaModes and RandR 1.0/1.1 handling, fullscreen applications (e.g., SDL-based applications,
Wine), should have more resolutions available to them, and should
interact better with multiple monitor configurations.
- Fixed a bug that could cause G8x, G9x, and GT2xx GPUs to display a black screen or corruption after waking up from suspend.
- Fixed several bugs that could cause some OpenGL programs to hang when calling fork(3).
- Fixed an nvidia-settings bug that caused the results of ProbeDisplays queries made with the --display-device-string option to be formatted
- Improved the responsiveness of updates to the nvidia-settings control panel when displays are hotplugged.
- Fixed a bug that caused display corruption when setting some transforms, especially when panning a transformed display.
- Fixed a bug that caused extra RandR events to be generated the first time a display is hotplugged.
- Fixed a bug that caused X11 modelines with '@' in their names to be rejected.
- Added support for DisplayPort 1.2 branch devices, which allow multiple displays to be connected to a single DisplayPort connector on a graphics
- Fixed a bug that caused most OpenGL texture uploads to be slow when the context was bound rendering to an RGB overlay drawable.
- Fixed a bug that caused audio over HDMI to not work after restarting the X server on some MCP7x (IGP) GPUs.
- Updated the X configuration option "UseDisplayDevice" to honor the value "none" on any GPU.
- Added RandR output properties _ConnectorLocation, ConnectorNumber, ConnectorType, EDID, _GUID, and SignalFormat. See the README for details
on these properties.
- Extended support for Base Mosaic to all G80+ SLI configurations with up to three displays.
- Fixed a bug that caused some monitors to fail to wake from DPMS suspend mode when multiple DisplayPort monitors were attached to one GPU.
- Removed controls for XVideo attributes from the "X Server XVideo Settings" page of the nvidia-settings control panel. XVideo attributes
can be configured in XVideo player applications, or through utilities
such as xvattr.
- Fixed a bug that caused all ports on an XVideo adaptor to share color correction settings.
- Removed support for the following X configuration options:
Similar control is available through the NVIDIA HorizSync and
VertRefresh X configuration options. Please see the NVIDIA driver
README for details.
- Added support for desktop panning when rotation, reflection, or transformation is applied to a display device (either through
RandR or through the MetaMode syntax); panning would previously be
ignored in that case.
- Implemented hotfix for a privilege escalation vulnerability reported on
August 1, 2012. For more details, see:
Installation instructions: Once you have downloaded the driver, change to the directory containing the driver package and install the driver by running, as root, tar xzf NVIDIA-FreeBSD-x86_64-304.37.tar.gz && cd NVIDIA-FreeBSD-x86_64-304.37 & make install
Then, edit your X configuration file so that the NVIDIA X driver will be used; this can normally be done by running nvidia-xconfig
Note that the list of supported GPU products is provided to indicate which GPUs are supported by a particular driver version. Some designs incorporating supported GPUs may not be compatible with the NVIDIA Linux driver: in particular, notebook and all-in-one desktop designs with switchable (hybrid) or Optimus graphics will not work if means to disable the integrated graphics in hardware are not available. Hardware designs will vary from manufacturer to manufacturer, so please consult with a system's manufacturer to determine whether that particular system is compatible.
See the README
for more detailed instructions.